| Picture shows beater which must be ordered separately
This hard wearing mixer is designed efficiently mix cement pastes and mortar, using three automatic mixing cycles, in compliance with: EN196/1, EN 196/3 and EN 480/1. It is possible to select either manual operation, or one of the two automatic programs. By operating automatically on changes of speed, stops and mixing sequences, indicated by an audible signal, the unit performs the mixing cycle. The unit is equipped with an automatic sand dispenser, which fills the mixing bowl with the sand for a period of 30seconds (only EN 196/1 program). Complete with safety door conforming to 89/392/CEE Directive; if opened it automatically stops the machine.
To comply with EN standard, please specify Stainless Steel Beater when ordering. |
|
SpecificationRevolving action – 140 or 285rpm |
|
Related products
-
Direct Digital Shear Apparatus
Read moreDigital direct shear box, floor mounted with carriage assembly and load hanger with 10:1 lever loading device. To accept the following sample sizes: 60mm diameter 60mm square 100mm diameter 100mm square 2.5 inch diameter Features Microprocessor controlled digital stepper motor Control via the digital display with keyboard Return datum facility Fully steplessly variable speed over …
-
Automatic / Manual Mortar Mixer
Read moreEN 196-1, EN 196-3 and BS 3892 Used for mixing cement mortar, 5 liters capacity Stainless Steel Bowl with Stainless Steel Beater. The beater revolves about its axis and is driven around the bowl in planetary motion. Two speed of mixer blade can be selected)Auto or Manual). Low speed is 140rpm for blade and 62rpm …
-
Aggregate Impact Value
Read moreThe 150mm ACV apparatus consists of steel cylinder with a nominal diameter of 150mm, a plunger, baseplate, tamping rod and measure. All surfaces that come into contact with the aggregate are cadmium plated against corrosion. The metal measure is 115mm diameter x 180mm deep. Used for aggregate passing 12.7mm and retained by a 9.52mm sieve. …
-
Plunger Penetration Apparatus
Read moreUsed to determine the consistency of fresh mortar, lime and masonry cement. The base is designed to locate the test cup accurately. The height of the drop can be adjusted to 100mm. Supplied complete with test cup and tamper, both manufactured from anodised aluminium. Dimensions: 200mm x 200mm x 700mm Weight: 8Kg
