Category: Cement
Cement
Showing all 12 results
-
Automatic / Manual Mortar Mixer
Read moreEN 196-1, EN 196-3 and BS 3892 Used for mixing cement mortar, 5 liters capacity Stainless Steel Bowl with Stainless Steel Beater. The beater revolves about its axis and is driven around the bowl in planetary motion. Two speed of mixer blade can be selected)Auto or Manual). Low speed is 140rpm for blade and 62rpm …
-
Automatic Cement Compression Test Machine
Read moreAUTOMATIC CEMENT COMPRESSION MACHINES Standard: BS EN 196-1, BS 4550, ASTM C-109, BS EN 12390 Class 1 ADS 25/10EN AUTOMATED 250/10kN (TWIN FRAME) CEMENT / MORTAR TEST MACHINE EN 196-1 The Automatic Compression / Flexural Machine is designed to test mortar and cement specimens according to EN 196-1 requirements. The loading rate are automatically …
-
Automatic Mortar Mixer
Read morePicture shows beater which must be ordered separately This hard wearing mixer is designed efficiently mix cement pastes and mortar, using three automatic mixing cycles, in compliance with: EN196/1, EN 196/3 and EN 480/1. It is possible to select either manual operation, or one of the two automatic programs. By operating automatically on changes …
-
BRE Screed Tester
Read moreThe BRE Tester is designed to measure the soundness of a sand / cement floor screed as early as 14 days after laying. The device consists of a1m long, cylindrical guide rod, along which an annular weight of 4 kg (or 2kg) travels when released. At the bottom of the guide rod the weight strikes …
-
Jolting Table
Read moreEN-196-1 Used to compact cement mortar prism mould 40.1 x 10 x 160mm and drop heigh of 15mm with 60 drop per minute. Manufactured according to EN 196 -1 requirement standard. The control panel fixed with main switch, auto digital counter and push button safety switch. D5-B Vibrating Table EN 196-1 Another alternative for compacting …
-
Jolting Table for Prism Compaction
Read moreUsed to compact 40mm x 40mm x 160mm cement mortar prisms in the three gang mould. The table consists of a platform holding the mould, seated on a rotating cam driven at 60 revolutions per minute. The jolting group is connected to the table by bayonet joints for quick checking of the weights. The150mm drop …
-
Marsh Funnel Viscometer
Read moreThe Marsh Funnel is a simple device for indicating viscosity on a routine basis. When used with a measuring cup the funnel gives an empirical value for the consistency of a fluid. The number obtained depends partly on the effective viscosity at the rate of shear prevailing in the orifice, and partly on the rate …
-
Mortar Air Meter Type B – 1 Litre
Read more1 litre capacity air entrainment meter for mortar. Used to determine the void ratio in freshly mixed mortar, with hand operated pump. Features Push-button operation for simplicity Mechanical valve for secure, reliable seal between the pressure chamber and test container Integrated pressure gauge on top of unit Quick-release fasteners on cover Low weight = …
-
Mud Balance
Read moreConstructed of premium metals for durability, accuracy and ease of use The Mud Balance provides a simple, practical method for accurate determination of fluid density. It is one of the most sensitive and accurate field instruments available for determining the density or weight-per-unit-volume (specific gravity) of drilling fluids. An outstanding advantage of this Mud Balance …
-
Plunger Penetration Apparatus
Read moreUsed to determine the consistency of fresh mortar, lime and masonry cement. The base is designed to locate the test cup accurately. The height of the drop can be adjusted to 100mm. Supplied complete with test cup and tamper, both manufactured from anodised aluminium. Dimensions: 200mm x 200mm x 700mm Weight: 8Kg
