The standard penetrometer is sturdily constructed, with alight alloy base table with levelling screws, plated vertical rod and a micrometric vertical adjustment device. The slider is manufactured from brass with free fall. The dial, graduated in 0.1mm divisions round360°, has a diameter of 150mm.
The penetrometer is supplied with push-button stop and release, automatic zero set, micrometer adjustment and 50 and 100gweights.
Picture shows penetrometer with cone. Please note that these are not supplied with the penetrometer and must be purchased separately, see below.
Dimensions: 220 x 170 x 410mm
Weight: 11Kg
Cones, needles, penetration test gauges and penetration cups are available separately.
Related products
-
Automatic Soil Compactor
Read moreBS 1377, 1924, ASTM D 558, D 1883, D 560, D 698 S 21 Automatic CBR/Proctor, Compactor supplied with 2.5kg and 4.5kg drop interchangeable rammer, and dropping height is adjustable from 300mm t0 457mm. The base are automatic rotating equally and number of blow can be reset by digital blow counter. The compactor can accept …
-
Hand Vane Tester
Read moreHandheld, portable and easily used piece of field equipment to enable geotechnical engineers and technicians to provide accurate and meaningful results of shear strength in kilopascals (kPa). If used correctly it will also measure residual shear strength of cohesive soils (ie clays and silts). The 19mm vane blade range is approximately 180kPa. Dependant on the …
